loglib

/*______________________________________________________________*/
/*								*/
/* LOG Library	: burrb.def					*/
/* SCM Library	: burrb.ddb					*/
/*								*/
/* Author	: Bartels System				*/
/* Last Revision: 97/04/15					*/
/*______________________________________________________________*/
/*								*/
/* This library includes circuit families manufactured by	*/
/* Burr Brown such as						*/
/*								*/
/*	- Operational Amplifiers (op_*)				*/
/*	- Instrumentation Amplifiers				*/
/*	- Differential Amplifiers				*/
/*	- Transmitters						*/
/*	- Isolation Amplifiers					*/
/*	- Integrators						*/
/*	- Voltage References					*/
/*	- Filters						*/
/*	- D/A Converters					*/
/*	- Analog Multiplexers					*/
/*	- Sample/Hold Amplifiers				*/
/*	- A/D Converters					*/
/*	- Data Acquisition Components				*/
/*	- DC/DC Converters					*/
/*	- Timers						*/
/*								*/
/* NOTE:							*/
/*								*/
/* The part names used in this library DO NOT include suffixes	*/
/* referring to temperature range, timing constraints, plastic	*/
/* or ceramic DIL packages (as long as pin compatibility is	*/
/* maintained).							*/
/*______________________________________________________________*/

/*______________________________________________________________*/
/* Operational Amplifiers */

/* High Voltage Operational Amplifier */

part 3580 : default to3_8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "3580" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o,v1,v2) ;
	xlat (i,n,a,b,o,v1,v2)
	  to (5,6,3,4,1, 2, 7) ;
	swap ((3,4)) ; 
	}

/* High Voltage - High Current Operational Amplifier */

part 3583 : default to3_8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "3583" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o,v1,v2) ;
	xlat (i,n,a,b,o,v1,v2)
	  to (5,6,3,4,1, 2, 7) ;
	swap ((3,4)) ; 
	}

/* High Voltage Operational Amplifier */

part 3584 : default to3_8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "3584" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,c,o,v1,v2) ;
	xlat (i,n,a,b,c,o,v1,v2)
	  to (5,6,3,4,8,1, 2, 7) ;
	swap ((3,4)) ; 
	}

/* Ultra-Low Noise Precision Operational Amplifier */

part opa27 : default dil8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA27" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	xlat (i,n,a,b,o)
	  to (2,3,1,8,6) ;
	swap ((1,8)) ;
	}

/* Ultra-Low Noise Precision Operational Amplifier */

part opa37 : default dil8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA37" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	xlat (i,n,a,b,o)
	  to (2,3,1,8,6) ;
	swap ((1,8)) ;
	}

/* Low Noise Precision Difet Operational Amplifier */

part opa111 : default to99 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA111" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o,g) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	xlat (i,n,a,b,o,g)
	  to (2,3,1,5,6,8) ;
	swap ((1,5)) ; 
	}

/* Precision High Speed Difet Operational Amplifier */

part opa627 : default dil8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA627" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	xlat (i,n,a,b,o)
	  to (2,3,1,5,6) ;
	swap ((1,5)) ; 
	}

/* Quad Speed Precision Difet Operational Amplifier */

part opa404 : default dil14 {
	newattr "$comment" = "Quad Op-Amp" ;
	newattr "$commentge" = "Vierfach-Operationsverstaerker" ;
	newattr "$type" = "OPA404" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,o) ;
	net "vff" : (4) ;
	net "vgg" : (11) ;
	xlat ( i, n, o)
	  to ( 2, 3, 1)
	  or ( 6, 5, 7)
	  or ( 9,10, 8)
	  or (13,12,14) ;
	swap ((2,3,1), (6,5,7), (9,10,8), (13,12,14)) ;
	}

part opa404x : default dil14 {
	newattr "$comment" = "Quad Op-Amp" ;
	newattr "$commentge" = "Vierfach-Operationsverstaerker" ;
	newattr "$type" = "OPA404X" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,o) ;
	net "+15v" : (4) ;
	net "-15v" : (11) ;
	xlat ( i, n, o)
	  to ( 2, 3, 1)
	  or ( 6, 5, 7)
	  or ( 9,10, 8)
	  or (13,12,14) ;
	swap ((2,3,1), (6,5,7), (9,10,8), (13,12,14)) ;
	}

/* High Voltage FET-Input Operational Amplifier */

part opa445 : default dil8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA445" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o,vp,vm) ;
	xlat (i,n,a,b,o,vp,vm)
	  to (2,3,1,5,6, 7, 4) ;
	swap ((1,5)) ; 
	}

/* Precision High Speed Difet Operational Amplifier */

part opa602 : default dil8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA602" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	xlat (i,n,a,b,o)
	  to (2,3,1,5,6) ;
	swap ((1,5)) ; 
	}

/* Precision High Speed Difet Operational Amplifier */

part opa637 : default dil8 {
	newattr "$comment" = "Op-Amp" ;
	newattr "$commentge" = "Operationsverstaerker" ;
	newattr "$type" = "OPA637" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,a,b,o) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	xlat (i,n,a,b,o)
	  to (2,3,1,5,6) ;
	swap ((1,5)) ; 
	}

/* Precision Dual Difet Operational Amplifier */

part opa2107 : default dil8 {
	newattr "$comment" = "Dual Op-Amp" ;
	newattr "$commentge" = "Zweifach-Operationsverstaerker" ;
	newattr "$type" = "OPA2107" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,o) ;
	net "vff" : (8) ;
	net "vgg" : (4) ;
	xlat (i,n,o)
	  to (2,3,1)
	  or (6,5,7) ;
	swap ((2,3,1), (6,5,7)) ;
	}

/*______________________________________________________________*/
/* Instrumentation Amplifiers */
/* - Amplifiers, Transmitters, Receivers */

/* Very-High Accuracy Instrumentation Amplifier */

part ina101 : default dil14 {
	newattr "$comment" = "Instrumentation Amplifier" ;
	newattr "$commentge" = "Instrumentenverstaerker" ;
	newattr "$type" = "INA101" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,gs1,g1,g2,gs2,n,oa2,ref,o,oa1,b,a) ;
	net "vff" : (2) ;
	net "vgg" : (13) ;
	xlat (i,gs1,g1,g2,gs2, n,oa2,ref,o,oa1,b,a)
	  to (3,  4, 5,10, 11,12,  9, 14,1,  8,6,7) ;
	}

/* Low Noise, Low Distortion Instrumentation Amplifier */

part ina103 : dil16 {
	newattr "$comment" = "Instrumentation Amplifier" ;
	newattr "$commentge" = "Instrumentenverstaerker" ;
	newattr "$type" = "INA103" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (ip,im,gsp,gsm,rgp,rgm,g100,ofp,ofm,gdp,gdm,out,sen,
	     ref,vm,vp) ;
	xlat (ip,im,gsp,gsm,rgp,rgm,g100,ofp,ofm,gdp,gdm,out,sen,ref,vm,vp)
	  to ( 1,16,  2, 15,  6, 13,  14,  3,  4,  5, 12, 10, 11,  7, 8, 9) ;
	}

/* Precision Unity Gain Differential Amplifier */

part ina105 : default dil8 {
	newattr "$comment" = "Differential Amplifier" ;
	newattr "$commentge" = "Differenzverstaerker" ;
	newattr "$type" = "INA105" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,5,6,8) ;
	net "vff" : (7) ;
	net "vgg" : (4) ;
	}

/* Fast-Setting FET-Input Very-High Accuracy Instrumentation Amplifier */

part ina110 : default dil16 {
	newattr "$comment" = "Instrumentation Amplifier" ;
	newattr "$commentge" = "Instrumentenverstaerker" ;
	newattr "$type" = "INA110" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,g,a,b,r,v3,c,d,v1,v2,v4,s,o) ;
	net "vff" : (8) ;
	net "vgg" : (7) ;
	xlat (i,n,g,a,b,r,v3, c, d,v1,v2,v4, s,o)
	  to (1,2,3,4,5,6,16,15,14,13,12,11,10,9) ;
	} 

/* Precision Instrumentation Amplifier */

part ina120 : default dil18 {
	newattr "$comment" = "Instrumentation Amplifier" ;
	newattr "$commentge" = "Instrumentenverstaerker" ;
	newattr "$type" = "INA120" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin(1,3,4,5,6,7,8,9,10,11,12,13,14,15,16,18) ;
	net "vff" : (2) ;
	net "vgg" : (17) ;
	}

/* Digitally-Controlled Programmable-Gain Instrumentation Amplifier */

part pga202 : default dil14 {
	newattr "$comment" = "Instrumentation Amplifier" ;
	newattr "$commentge" = "Instrumentenverstaerker" ;
	newattr "$type" = "PGA202" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,4,5,6,7,8,9,10,11,12,13,14) ;
	net "vff" : (3) ;
	net "vgg" : (13) ;
	}

/* Precision 4mA to 20mA Two-Wire RTD Transmitter */

part xtr103 : default dil16 {
	newattr "$comment" = "RTD Transmitter" ;
	newattr "$commentge" = "RTD-Uebertrager" ;
	newattr "$type" = "XTR103" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16) ;
	}

/* Precision Voltage-to-Current Converter/Transmitter */

part xtr110 : default dil16 {
	newattr "$comment" = "Voltage-to-Current Transmitter" ;
	newattr "$commentge" = "Spannung/Strom-Wandler" ;
	newattr "$type" = "XTR110" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (vrf,vrs,vra,vin1,vrin,vin2,
	     com,vxx,sr,ss,gd,a,b,spa,sp1,sp2) ;
	xlat (vrf,vrs,vra,vin1,vrin,vin2,
	      com,vxx, sr,  ss,  gd,   a,b,spa,sp1,sp2)
	  to ( 15, 12, 11,   4,   3,   5,
	        2, 16,  1,  13,  14,   7,6,  8, 10,  9) ;
	} 

/*______________________________________________________________*/
/* Isolation Products */
/* - Isolation Amplifiers, Isolation Power Supplies */

/* Precision Lowest Cost Isolation Amplifier */

part iso122 : default isodil16 {
	newattr "$comment" = "Isolation Amplifier" ;
	newattr "$commentge" = "Isolationsverstaerker" ;
	newattr "$type" = "ISO122" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,7,8,9,10,15,16) ;
	}

/*______________________________________________________________*/
/* Analog Circuit Functions */
/* - Multipliers/Dividers, Log Amps, RMS-to-DC */
/* - Multifunction Converters, References */

/* Low Noise, Dual Switched Integrator */

part acf2101 : default dil24s {
	newattr "$comment" = "Integrator" ;
	newattr "$type" = "ACF2101" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,
	     13,14,15,16,17,18,19,20,21,22,23,24) ;
	}

/* Precision Voltage Reference */

part ref102 : default dil8 {
	newattr "$comment" = "Voltage Reference" ;
	newattr "$commentge" = "Spannungsversorgung" ;
	newattr "$type" = "REF102" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (vin,gnd,tr,out,8) ;
	xlat (vin,gnd,tr,out,8)
	  to (  2,  4, 5,  6,8) ;
	}

/* Universal Active Filter */

part uaf42 : default dil14 {
	newattr "$comment" = "Universal Active Filter" ;
	newattr "$commentge" = "Universeller Aktiver Filter" ;
	newattr "$type" = "UAF42" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,4,5,6,7,8,11,12,13,14) ;
	net "vff" : (10) ;
	net "vgg" : (9) ;
	}

/*______________________________________________________________*/
/* Digital-to-Analog Converters */
/* - Instrumentation, Audio, Communications, DSP */

/* Microprocessor-Compatible 12-Bit D/A Converter */

part dac811 : default dil28b {
	newattr "$comment" = "D/A Converter (12-Bit, fP-Compatible)" ;
	newattr "$commentge" = "D/A-Wandler (12-Bit, yP-kompatibel)" ;
	newattr "$type" = "DAC811" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,
	     15,16,17,18,19,20,21,22,23,24,25,26,27,28) ;
	}

/* Dual CMOS 12-Bit Multiplying D/A Converter */

part dac7800 : default dil16 {
	newattr "$comment" = "Dual CMOS DAC (12-Bit, Multiplying)" ;
	newattr "$commentge" = "Zweifach CMOS D/A-Wandler (12-Bit)" ;
	newattr "$type" = "DAC7800" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16) ;
	}

/* Dual CMOS 12-Bit Multiplying D/A Converter */

part dac7801 : default dil24b {
	newattr "$comment" = "Dual CMOS DAC (12-Bit, Multiplying)" ;
	newattr "$commentge" = "Zweifach CMOS D/A-Wandler (12-Bit)" ;
	newattr "$type" = "DAC7801" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,
	     13,14,15,16,17,18,19,20,21,22,23,24) ;
	}

/* Dual CMOS 12-Bit Multiplying D/A Converter */

part dac7802 : default dil24b {
	newattr "$comment" = "Dual CMOS DAC (12-Bit, Multiplying)" ;
	newattr "$commentge" = "Zweifach CMOS D/A-Wandler (12-Bit)" ;
	newattr "$type" = "DAC7802" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,
	     13,14,15,16,17,18,19,20,21,22,23,24) ;
	} 

/*______________________________________________________________*/
/* Analog Multiplexers */

/* High Speed CMOS Analog Multiplexer */

part mpc800 : default dil28b {
	newattr "$comment" = "Analog CMOS Multiplexer" ;
	newattr "$type" = "MPC800" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (a0,a1,a2,a3,
	     i1,i2,i3,i4,i5,i6,i7,i8,i9,i10,i11,i12,i13,i14,i15,i16,
	     vref,oa,ob,en) ;
	net "vff" : (1) ;
	net "vgg" : (27) ;
	net "agnd" : (12) ;
	xlat (a0,a1,a2,a3,
	      i1,i2,i3,i4,i5,i6,i7,i8,i9,i10,i11,i12,i13,i14,i15,i16,
	      vref,oa,ob,en)
	  to (17,16,15,14,
	      19,20,21,22,23,24,25,26,11, 10,  9,  8,  7,  6,  5,  4,
	      13,28,2,18) ;
	swap (((19,20,21,22,23,24,25,26),28), ((11,10,9,8,7,6,5,4),2)) ;
	} 

/* High Speed CMOS Analog Multiplexer */

part mpc801 : default dil18 {
	newattr "$comment" = "Analog CMOS Multiplexer" ;
	newattr "$type" = "MPC801" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (a0,a1,a2,i1,i2,i3,i4,i5,i6,i7,i8,vref,oa,ob,en) ;
	net "vff" : (1) ;
	net "vgg" : (17) ;
	net "agnd" : (7) ;
	xlat (a0,a1,a2,i1,i2,i3,i4,i5,i6,i7,i8,vref,oa,ob,en)
	  to (11,10, 9,13,14,15,16, 6, 5, 4, 3,   8,18, 2,12) ;
	swap (((13,14,15,16,6,5,4,3))) ;
	} 

/*______________________________________________________________*/
/* Sample/Hold Amplifiers */

/* Sample/Hold Amplifier */

part shc76 : default dil14 {
	newattr "$comment" = "Sample/Hold Amplifier" ;
	newattr "$commentge" = "Sampling-Verstaerker" ;
	newattr "$type" = "SHC76" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,is,mc,a,b,o) ;
	net "vff" : (11) ;
	net "vgg" : (14) ;
	xlat ( i,is,mc,a,b,o,agnd,dgnd)
	  to (13,12, 1,9,7,8,6,4) ;
	swap ((9,7)) ;
	}

/* High Speed Bipolar Monolithic Sample/Hold Amplifier */

part shc5320 : default dil14 {
	newattr "$comment" = "Sample/Hold Amplifier" ;
	newattr "$commentge" = "Sampling-Verstaerker" ;
	newattr "$type" = "SHC5320" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (i,n,mc,a,b,c,ref,ehc,o) ;
	net "vff" : (9) ;
	net "vgg" : (5) ;
	net "drg" : (13) ;
	xlat (i,n,mc,a,b,c,ref,ehc,o)
	  to (2,1,14,3,4,8,  6, 11,7) ;
	swap ((3,4)) ;
	}

/*______________________________________________________________*/
/* Analog-to-Digital Converters */
/* - Instrumentation, Audio, Communications, DSP */

/* 16-Bit A/D Converter */

part adc71 : default dil32b {
	newattr "$comment" = "A/D Converter (16-Bit)" ;
	newattr "$commentge" = "A/D-Wandler (16-Bit)" ;
	newattr "$type" = "ADC71" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,16,
	     17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32) ;
	}

/* 16-Bit A/D Converter */

part adc76 : default dil32b {
	newattr "$comment" = "A/D Converter (16-Bit)" ;
	newattr "$commentge" = "A/D-Wandler (16-Bit)" ;
	newattr "$type" = "ADC76" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,16,
	     17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32) ;
	}

/* Microprocessor-compatible A/D Converter */

part adc574 : default dil28b {
	newattr "$comment" = "A/D Converter (fP-Compatible)" ;
	newattr "$commentge" = "A/D-Wandler (fP-kompatibel)" ;
	newattr "$type" = "ADC574" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,
	     15,16,17,18,19,20,21,22,23,24,25,26,27,28) ;
	}

/* 16-Bit A/D Converter with Microprocessor Interface */

part adc700 : default dil28b {
	newattr "$comment" = "A/D Converter (16-Bit, fP Interface)" ;
	newattr "$commentge" = "A/D-Wandler (16-Bit, fP-Interface)" ;
	newattr "$type" = "ADC700" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,
	     15,16,17,18,19,20,21,22,23,24,25,26,27,28) ;
	}

/* 12-Bit Serial Output A/D Converter */

part adc804 : dil24b {
	newattr "$comment" = "A/D Converter (12-Bit, Serial Out)" ;
	newattr "$commentge" = "A/D-Wandler (12-Bit, ser. Ausgang)" ;
	newattr "$type" = "ADC804" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,
	     13,14,15,16,17,18,19,20,21,22,23,24) ;
	}

/* Autocalibrating, 4-Channel, 12-Bit A/D Converter */

part adc7802 : default dil28b {
	newattr "$comment" = "ADC (12-Bit, 4-Channel, Autocalibr.)" ;
	newattr "$commentge" = "ADC (12-Bit, 4-Kanal, autokalibr.)" ;
	newattr "$type" = "ADC7802" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,
	     15,16,17,18,19,20,21,22,23,24,25,26,27,28) ;
	}

/* 12-Bit 3fs Sampling A/D Converter */

part ads7800 : default dil24b {
	newattr "$comment" = "A/D Converter (12-Bit, 3fs Sampling)" ;
	newattr "$commentge" = "A/D-Wandler (12-Bit, 3fs-Sampling)" ;
	newattr "$type" = "ADS7800" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,
	     13,14,15,16,17,18,19,20,21,22,23,24) ;
	}

/*______________________________________________________________*/
/* Voltage-to-Frequency Converters */

/*______________________________________________________________*/
/* Data Acquisition Components */

/* 16 Single Ended/8 Differential Input 12-Bit Data Acquisition Systems */

part sdm8xx : default pga68 {
	newattr "$comment" = "Data Acquisition" ;
	newattr "$commentge" = "Datenanreicherungsbaustein" ;
	newattr "$type" = "SDM8xx" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin ( 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,16,
	     17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,
	     33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,
	     49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,
	     65,66,67,68) ;
	xlat (  1,  2,  3,  4,  5,  6,  7,  8,  9, 10,
	       11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
	       21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
	       31, 32, 33, 34, 35, 36, 37, 38, 39, 40,
	       41, 42, 43, 44, 45, 46, 47, 48, 49, 50,
	       51, 52, 53, 54, 55, 56, 57, 58, 59, 60,
	       61, 62, 63, 64, 65, 66, 67, 68)
	  to ( a2, a3, b3, a4, b4, a5, b5, a6, b6, a7,
	       b7, a8, b8, a9, b9,a10,b10,b11,c11,c10,
	      d11,d10,e11,e10,f11,f10,g11,g10,h11,h10,
	      j11,j10,k11,k10,l10, l9, k9, l8, k8, l7,
	       k7, l6, k6, l5, k5, l4, k4, l3, k3, l2,
	       k2, k1, j1, j2, h1, h2, g1, g2, f1, f2,
	       e1, e2, d1, d2, c1, c2, b1, b2) ;
	}

/*______________________________________________________________*/
/* Surface Mount Components */

/*______________________________________________________________*/
/* Accessories */

/*______________________________________________________________*/
/* Other Burr Brown Products */

part pwr : default pwr4xx {
	newattr "$comment" = "DC/DC Converter" ;
	newattr "$commentge" = "DC/DC-Wandler" ;
	newattr "$type" = "PWR" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (vina,vinb,vouta,gout,voutb) ;
	xlat (vina,vinb,vouta,gout,voutb)
	  to (   1,   2,    3,   4,    5) ;
	}

/* Multichannel DC/DC Converter */

part pwr1017 : default pwr1017 {
	newattr "$comment" = "Multichannel DC/DC Converter" ;
	newattr "$commentge" = "Multikanal-DC/DC-Wandler" ;
	newattr "$type" = "PWR1017" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16) ;
	swap ((7,5,6), (10,8,9), (12,13,11), (14,16,15)) ;
	}

/* Regulated Low-Noise DC/DC Converter */

part pwr1546 : default pwr {
	newattr "$comment" = "Regulated Low-Noise DC/DC Converter" ;
	newattr "$commentge" = "DC/DC-Wandler geregelt" ;
	newattr "$type" = "PWR1546" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (vina,vinb,vouta,gout,voutb) ;
	xlat (vina,vinb,vouta,gout,voutb)
	  to (   1,   2,    3,   4,    5) ;
	}

/* Regulated Low-Noise DC/DC Converter */

part pwr5920 : default pwr59xx {
	newattr "$comment" = "Regulated Low-Noise DC/DC Converter" ;
	newattr "$commentge" = "DC/DC-Wandler geregelt" ;
	newattr "$type" = "PWR5920" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,10,11,12,13,14,15,22,23,24) ;
	net internal : (1,24) ;
	net internal : (2,23) ;
	net internal : (3,22,10,15) ;
	net internal : (12,13) ;
	net internal : (11,14) ;
	}

/*______________________________________________________________*/
/* Other Products */

/* Low Power silicongate LinCMOS Timer */
/* see also: Texas TLC555 */
part 555 : default dil8 {
	newattr "$comment" = "Low Power LinCMOS Timer" ;
	newattr "$commentge" = "Low Power LinCMOS-Zeitgeber" ;
	newattr "$type" = "555" ;
	newattr "$manufacturer" = "Burr Brown" ;
	pin (1,2,3,4,5,6,7,8) ;
	}

/*______________________________________________________________*/
/* Logical Library definition file end */

end.